حل مشکل kernel security check failure windows 10

kernel security check failure windows 10شاید تا کنون از دور یا نزدیک صفحه آبی مرگ را مشاهده کرده و یا اسمی از آن بگوشتان خورده باشد.
صفحه ابی مرگ در ویندوز که به انBlue Screen of Death یا اختصارا BSoD گفته میشود, صفحه ابی خطا یا Blue Screen Error و یا صفحه ابی یا Bluescreen نیز نامیده میشود.

این صفحه ابی رنگ در زمانی نمایان میشود که سیستم عامل ویندوز قادر به بازیابی و یا تصحیح خطای سیستم نیست و یا خطای غیر قابل جبرانی در ان رخ داده است.

در واقع دو نوع صفحه خطا وجود دارد که صفحه ابی مرگ نشانگر خطائی جدی تر است.

یکی از این خطاها که اخیرا با نصب ویندوز 8 و علی الخصوص ویندوز 10 بیشتر مشاهده می شود خطای

kernel security check failure windows 10

است، یکی از شایع ترین علل مشاهده این خطا نصب نرم افزارهایی است که سازگاری کامل با سیستم عامل مربوطه را ندارند. در زیر به ترتیب علل اصلی این خطا آورده شده است.

1- نصب درایور (صوت، گرافیک، کارت تی وی و...) غیر همخوان با سیستم عامل - راه حل آن پاک کردن درایور و استفاده از نسخه جدید و همخوان

2- نصب نرم افزار؛ در این مورد دو حالت اتفاق می افتد:

الف) یا خود نرم افزار قابلیت همخوانی با سیستم عامل نداشته و هنگام اجرا با مشکل مواجه می شود که باید نرم افزار پاک شده اگر کامل نصب نشده دوباره کامل نصب شود، یا از نسخه جدید استفاده شود.

ب) یا نرم افزار همخوانی دارد ولی با درایور معیوب ( اعم از گرافیک، صوت و..) قابلیت همخوانی ندارد یعنی درایور از قبل مشکل داشته ولی هنگام اجرای برخی نرم افزارها خود را نمایان می کند که طبق روش 1 باید عمل شود.

3- ویروسه شدن سیستم عامل که یا باید از آنتی ویروس بروز شده استفاده کرد یا سیستم عامل را دوباره نصب کرد.

4- نصب نشدن کامل و صحیح سیستم عامل و یا معیوب شدن بنا به عللی، که در اینصورت یا باید سیستم عامل را دوباره نصب کرد و یا با استفاده از فایل نصبی سیستم عامل در محیط بوت نسبت به رپیر (Repair) آن اقدام نمود.

 


Fix: ‘Kernel Security Check Failure’ in Windows 8.1, 10

If you are reading this article then it means that you have gotten the Blue Screen of Death (BSOD) as well as many other users that have upgraded their operating system to Windows 8.1 or Windows 10. Fortunately for you by reading the lines below you will get a clue as why you have this issue and also what you need to do to fix the “Kernel Security Check failure” BSOD in Windows 8.1 and Windows 10.
How to fix “Kernel Security Check failure” in Windows 8.1 and Windows 10
The “Kernel Security Check failure” in Windows 8.1 or Windows 10 can appear for different kinds of reasons like memory issues, virus infections of the Windows 8.1 or Windows 10 but the most common is that the drivers you were using for the previous versions of Windows are not compatible with the new Windows 8.1 or Windows 10 thus giving you the “Kernel Security Check failure” error message followed by the error code “0x000000139”

Tutorial on how to fix “Kernel Security Check failure” in Windows 8.1 or Windows 10

There are two possibilities to this issue, either you can get into your Windows 8.1 or Windows 10 and from time to time you get the “Kernel Security Check failure” Blue Screen of Death or you simply cannot log in to your operating system and every time you power up the device it gives you this error message.

If you cannot log in at all into Windows 8.1 or Windows 10 then follow the steps below:

First method:

  1. Restart computer and insert Windows 8 or Windows 10 bootable media into optical media drive (You can create Windows 10 bootable media on this page)
  2. On the displayed Windows Setup box, click Next
  3. On the next page, click Repair your computer
  4. On Choose an option screen, click Troubleshoot
  5. On Troubleshoot screen, click Advanced options
  6. On Advanced options screen, click Command Prompt
  7. On the opened Command Prompt window type C: and hit Enter.
  8. On C: prompt, type the following command and press Enter to enable legacy advanced boot menu:
    • BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
  9. Once the command executed successfully, type EXIT command to close the Command Prompt window
  10. Back on the Choose an option screen, click Continue and start your computer normally

If this didn’t help, you can try some of the following solutions.

Second method:

  1. If Windows 8.1 or Windows 10 fails to start correctly you will have to choose the “See advanced repair options”.
  2. In the window that shows next left click or tap on the “Troubleshoot” feature.
  3. In the “Troubleshoot” window left click or tap on the “Advanced Options”
  4. In the “Advanced Options” window left click or tap on the “Startup Settings” feature.
  5. Left click or tap on the “Restart” button situated in the lower right side of the screen.
  6. Now your operating system should boot with the minimum system requirements.
  7. If the system started you will need to move the mouse over to the upper right side of the window.
  8. Left click or tap on the “Search” feature situated in the menu that appeared.
  9. In the search box write the following: “cmd” without the quotes.
  10. Right click on the “Command Prompt” icon.
  11. Left click or tap on the “Run as Administrator” feature.
  12. Now you should have the command prompt window with administrative rights in front of you.
  13. Write the following in the command prompt window: “sfc /scannow” without the quotes.
  14. Press the “Enter” button on the keyboard.
  15. Let the process finish and write the following in the command prompt: “Exit”.
  16. Press the “Enter” button on the keyboard.
  17. Move the mouse cursor again over to the upper right side of the screen.
  18. From the Charms menu go down and left click or tap on the “Search” feature.
  19. In the search box write the following: “memory” without the quotes.
  20. After the search has finished left click or tap on the “Diagnose your computer’s memory problems”.
  21. Left click or tap on the “Restart now and check for problems” feature.
  22. Now after the reboot of the operating system it will automatically check your RAM memory and display the possible reasons as why you get the Blue Screen error message in Windows 8.1 or Windows 10
  23. Reboot the Windows 8.1 or Windows 10 operating system normally.
  24. Check to see if it still gives you the BSOD message.

Third method:

We will have to check the memory to make sure it is properly placed into the socket and it is functioning correctly.
Note: It is always a safe bet to try and change it with another memory or change the slot in which it is plugged into the motherboard and reboot the Windows 8.1 or Windows 10 to see if it starts.

Fourth method:

You will have to check the hard drive to see if it can function correctly so make sure that it is plugged in correctly into your device and again if you have a spare hard drive try changing it to see if it starts correctly.

Now if your operating system starts and it only gives you this “Kernel Security Check failure” message occasionally follow the steps below:

First Method:

  1. Left click or tap on the link posted below to download the driver update tool
  2. Click here to download Driver Reviver
  3. Now run this application by following the instructions on the screen to find out what drivers are out of date and update them using the same application.

Second Method:

  1. Run a full system virus and malware scan with your antivirus.
  2. If it found a threat you will need to remove it by using the same antivirus.
    Note: If the antivirus cannot remove the virus first you should try installing a different antivirus to see if it works, if it does not then you will most likely have to restore your operating system to a point where you did not had this issue or completely reinstall the operating system.

Third Method:

  1. Press and hold the “Windows” button and the “E” button.
  2. Now you should have the Computer window in front of you.
    Note: Depending on how many partitions you have you will have to do the steps below for all of them.
  3. Right click on the partition.
  4. Left click or tap on the “Properties” feature present in the menu that pops up.
  5. Left click or tap on the “Tools” tab situated in the upper side of the “Properties” window.
  6. From the Tools feature left click or tap on the “Check” button under the “Error Checking” topic.
  7. Follow the instructions on the screen to finish the error checking and also choose the “Repair Drive” option if Windows 8.1 or Windows 10 has found errors on the drive.
    Note: This process can be very time consuming so depending on the hard drive’s memory it can go between half an hour and two hours before it is done.

The steps above will show you how to fix the “Kernel Security Check failure” error message in your Windows 8.1 or Windows 10 but if there is a hardware failure of the HDD or the RAM memory in your device you will most likely have to change it with a new one. If you have any additional questions regarding this subject please don’t hesitate to write us in the comments section of the page below and I will help you further as soon as possible.

برچسب ها: فایل ویدیویی, حل مشکل

چاپ